Control Boards

 
 
 

   Providing a wide range of input and output options this range of control boards make PC automation and control very easy.  The control boards come with ready to use application software and a DLL for those who want to write their own programs. Full details on each of the boards is available by clicking on the specific board image below. The boards are all available to purchase from the Control Boards Section of the Control Shop

   
       
 

The MiniBee (USB --> 14 Outputs)
    14 switching outputs from a single USB port. The Mini-BEE can be connected to any free USB port to give immediate access to 14 high voltage switches (up to 50v) It comes with BeeStep14 software allowing the complete beginner to quickly set up a fully flexible sequencer control system (no programming experience needed).

 
       
 

The DigiBee. (USB--> 16 Inputs and 16 Outputs).
    When you need both digital inputs AND outputs to your PC then there is no better choice than the Digi-Bee. It has 16 inputs and 16 outputs, all individually controllable. It comes with Logic-Lab control software enabling beginners with no programming experience to easily set up their own control system .

 
         
 

The Motor Bee. (USB --> 4 DC Motors AND a Servo)
    Control up to 4 DC Motors and a Servo from a single USB port. Including motor direction and speed control. Comes complete with "Motor-Way" software providing full control without the need for programming. A DLL is also provided allowing you to write your own programs very easily. (MotorBee also has 4 digital outputs and 6 digital inputs which are ideal for limit switches).

 
       
 

W.A.S.P. Windows Analogue Signal Processor
(USB-> 4 Analogue Inputs and 7 Digital Outputs)

    Opening up the door to the measurement of real world analogue signals from a wide range of devices such as temperature, light, pressure, humidity, noise etc...etc... Simply connect to a free USB port to have 4 analogue inputs and 7 high voltage switching outputs capable of direct connection to motors, relays etc... It comes with WaspWare software that allows the complete beginner to set up elaborate control systems with no programming.

 
       
   

The Stepper Bee (USB --> 2 x Stepper Motors)
    Explore the world of Stepper Motor control with the StepperBee. Simply connect one or two standard 4-phase stepper motors and start automating. StepperBee comes with AutoStep software allowing the complete beginner to quickly set up a working stepper motor control system (no programming experience needed). A DLL is also provided allowing you to write your own programs very easily.

 
         
   

The MaxiBee. (USB --> 64 Outputs)
    The professional choice. The maximum number of outputs from a single USB port. A massive 64 digital outputs individually controllable from the PC. Supplied with BeeStep 64 software allowing even the complete beginner to create their own sequencer control system without the need for programming.

 
         
   

The DigiBee +
(USB--> 16 Digital Inputs, 16 Digital Outputs and 4 Analogue Inputs).

    When you need both digital and analogue inputs AND digital outputs to your PC then there is no better choice than the Digi-Bee+. It has 16 Digital inputs, 4 Analogue inputs and 16 Digital outputs, all individually controllable. It comes with Logic-Lab Plus control software enabling beginners with no programming experience to easily set up their own control system.

 
         
   

The Bee Driver.
    Converting simple digital outputs to high voltage switching type outputs. It is compatible with the digital connection headers on the Maxi-Bee, Digi-Bee and Digi-Bee+.

 
         
   

  The RelayBee (USB --> 7 Relays and 7 DC Switches)
    7 sets of SPDT Relay Contacts plus 7 switching outputs from a single USB port.  It comes with BeeStep14 software allowing the complete beginner to quickly set up a fully flexible sequencer control system (no programming experience needed).

 
                   
   

  The Mini RelayBee (USB --> 2 Relays)
    2 sets of SPDT Relay Contacts from a single USB port.  It comes with BeeStep14 software allowing the complete beginner to quickly set up a fully flexible sequencer control system (no programming experience needed).

 
                   
   

 The Stepper Bee + (USB --> 2 x Large Stepper Motors)
    Explore the world of Stepper Motor control with the big brother of the stepper bee.  The StepperBee + has all of the facilities of the ordinary stepper bee (described above) with greatly increased power handling. Up to a massive 7Amps per phase !!!

 
                   
    ***  Need to use multiple boards on the one PC then see Beehive Software (free to download) ***    
                   
                   
 

.      .

 
 

Copyright pc-control.co.uk 2008